Closure Instructions

One Gallon Or One Quart Paint Can Shipper For Single, 2 Pack Or 4 Pack

Closure Instructions

  1. SEAL PAINT CANS:FOR GROUND SHIPMENTS ONLY, ATTACH 6 CAN CLIPS.FOR AIR OR GROUND SHIPMENTS, SEAL WITH LOCKING RING.(LOCKING RING REQUIRED FOR AIR SHIPMENTS)
  2. IF SHIPPING 1 UNIT, SEAL 1 CAN AND ASSEMBLE SINGLE SHIPMENT CORRUGATED BOX,IF SHIPPING 2 UNITS, SEAL 2 CANS AND ASSEMBLE 2 PACK CORRUGATED BOX,IF SHIPPING 4 UNITS, SEAL 4 CANS AND ASSEMBLE 4 PACK CORRUGATED BOX.
  3. PLACE EPS FOAM CAP INSERTS INTO BASE OF BOX.
  4. PUT FILLED CAN/CANS IN EPS FOAM CAP INSERTS.
  5. PLACE EPS FOAM CAP INSERTS ON TOP OF CAN/CANS.
  6. TAPE BOX CLOSED WITH 3″ REINFORCED GUMMED TAPE OR MINIMUM 2 MIL 2″ CLEAR CARTON SEALING TAPE.

ATTENTION

To seal can:

Apply downward pressure to lid until seated completely into grooves on can.

Air: Apply downward pressure to locking ring until contacting top of can.

Ground: Lock clips into grooves on can in an evenly spaced pattern.

Outer flaps meet. Use center seam tape pattern 2.5″ min. overlap

SINGLE KIT CONTAINS: ONE SINGLE SHIPMENT CARTON AND 2 EPS FOAM CAPS.

2 PACK KIT CONTAINS:: ONE 2 PACK CARTON AND 4 EPS FOAM CAPS.

4 PACK KIT CONTAINS:: ONE 4 PACK CARTON AND 8 EPS FOAM CAPS.

***LPS WILL ASSUME RESPONSIBILITY FOR PACKAGE INTEGRITY AND COMPLIANCE WITH ICAO/IATA, IMO AND UN STANDARDS, “ONLY”, IF ALL PACKAGE COMPONENTS ARE ASSEMBLED AND PURCHASED AS A SINGLE INTEGRATED UNIT.

 closure diagram packing instructions
closure diagram packing instructions

PDF Closure Instructions Downloadpdf