LPS Industries logo

1.800.275.6577 Outside USA 1.201.438.3515
Hazardous Materials Packaging
Shipping Identification Packaging
Packaging and Shipping Systems
 General Packaging
Hazardous Material Packaging
DOT Exemption - DOT-SP 8249 Exempt Pack - UN4G & 4GV Combo Packs - Specifications
CLOSURE INSTRUCTIONS:
DOT-SP 8249 EXEMPT PACK 16 OZ. AND 32 OZ. LIQUIDS, AND 1 LB. AND 6 LB. SOLIDS
TIGHTLY CLOSE PRIMARY CONTAINER.
(IF USING A BOTTLE, THE CAP MUST BE SEALED WITH 1" PRESSURE SENSITIVE TAPE.)

PLACE CONTAINER INTO INNER ZIPPERED BAG AND ZIP CLOSED.
 
closure diagram hazardous liquids TO SHIP LIQUIDS:
(LIQUIDS, PYROPHORIC SOLIDS OR DANGEROUS WHEN WET MATERIAL)

WRAP CONTAINER WITH CRIMPED CELLULOSE WADDING SUFFICIENT TO ABSORB CONTENT OF BOTTLE.

PLACE BAGGED CONTAINER WITH CUSHIONING INTO FRICTION LID CAN. PUT ON LID. APPLY LOCKING RING TO CAN.

PLACE CAN INTO INNER BOX. TAPE BOX CLOSED WITH 3" REINFORCED GUMMED TAPE OR MINIMUM 2 MIL 2" CLEAR CARTON SEALING TAPE.		 closure diagram hazardous solids TO SHIP SOLIDS:

WRAP CONTAINER WITH CELLULOSE WADDING SUFFICIENT FOR CUSHIONING.

PLACE WRAPPED CONTAINER INTO INNER BOX. TAPE BOX CLOSED WITH 3" REINFORCED GUMMED TAPE OR MINIMUM 2 MIL 2" CLEAR CARTON SEALING TAPE.

CONTINUE FOR LIQUIDS OR SOLIDS:

PLACE BOXED ASSEMBLY INTO OUTER ZIPPERED BAG AND ZIP CLOSED.

IF SHIPPING 1 UNIT:

PLACE ABOVE ASSEMBLY INTO OUTER UN MARKED SINGLE CARTON. TAPE BOX CLOSED WITH 3" REINFORCED GUMMED TAPE OR MINIMUM 2 MIL 2" CLEAR CARTON SEALING TAPE.

IF SHIPPING 2 UNITS:

ASSEMBLE TWO SETS OF INNER COMPONENTS, AND PLACE BOTH ASSEMBLIES INTO OUTER UN MARKED 2 PACK CARTON. TAPE BOX CLOSED WITH 3" REINFORCED GUMMED TAPE OR MINIMUM 2 MIL 2" CLEAR CARTON SEALING TAPE.

IF SHIPPING 4 UNITS:

ASSEMBLE 4 SETS OF INNER COMPONENTS, AND PLACE ALL FOUR ASSEMBLIES INTO OUTER UN MARKED 4 PACK CARTON. TAPE BOX CLOSED WITH 3" REINFORCED GUMMED TAPE OR MINIMUM 2 MIL 2" CLEAR CARTON SEALING TAPE.

*Please note that in order to remain compliant with DOT Regulations, wadding must be used for the shipment of liquids. One case of KP6522 will accommodate approximately 60-16 oz. or 30-32 oz. packages.

***LPS WILL ASSUME RESPONSIBILITY FOR PACKAGE INTEGRITY AND COMPLIANCE WITH ICAO/IATA. IMO AND UN STANDARDS, "ONLY", IF ALL PACKAGE COMPONENTS ARE ASSEMBLED AND PURCHASED AS A SINGLE INTEGRATED UNIT.

SINGLE LIQUID KIT CONTAINS:
1 INNER BAG, 1 CAN WITH LID, 1 LOCKING RING, 1 INNER BOX, 1 OUTER BAG AND 1 OUTER UN MARKED SINGLE CARTON.

SINGLE SOLID KIT CONTAINS:
1 INNER BAG, 1 INNER BOX, 1 OUTER BAG AND 1 OUTER UN MARKED SINGLE CARTON.

BOTTLES AND CELLULOSE WADDING SOLD SEPARATELY.
DOT Exemption - DOT-SP 8249 Exempt Pack - UN4G & 4GV Combo Packs - Specifications